Nov
16
16
Scratch built foam jet Arduino Xbee controller fitted to the wee Jet with 90 mm EDF
ardruino, Turnigy, Turnigy 20 ESC, xBee Commenti disabilitati su Scratch built foam jet Arduino Xbee controller fitted to the wee Jet with 90 mm EDF
Please see Prop Much Better Than EDF
Yellow Jet 758 Grams with remaining Coroplast 2 X 7.4 V 1300 mAh batteries Arduino Nano RX Xbee with antenna, servos and misc hardware. Chamfered the top on the leading edges. All control surfaces cut and hinged. ESC mounted
Lots of Jets http://www.rcgroups.com/forums/thumbgallery.php?do=showattach&u=151599&page=5
Space 1 Jet builder On RCgroups http://www.rcgroups.com/forums/member.php?u=151599
On 14.8 Volts its pushing almost 500 Grams, not so bad thrust mapping is as follows.
100 Grams 1.9 A 27.6 Watts
156 Grams 3.0 A 42.9 Watts
197 Grams 3.9 A 55.1 Watts
257 Grams 5.5 A 76.0 Watts
296 Grams 6.7 A 90.9 Watts
340 Grams 7.9 A 105.5 Watts
432 Grams 10.7 A 138.1 Watts
492 Grams 12.5 A 155.7 Watts