Posts | Comments

Planet Arduino

Archive for the ‘Femtoduino’ Category


Hands on with the super tiny arudino: FemtoDuino

arduino hacks, Femtoduino, reviews Commenti disabilitati su Hands on with the super tiny arudino: FemtoDuino 


We originally heard about the FemtoDuino last year. It looked good enough and tiny enough, but we didn’t really have a need for it. Recently though, we started on a new project (which you can follow on the forums!) which required an easy modification to an existing circuit. Space and weight were quite important so we decided to pick up a couple femtoduinos at $25 each, and give them a try.

These things are tiny. Their foot print is 20.7×15.2mm. You can see in the picture below, with a quarter for reference. Tiny. Frankly, there’s not much to say about them. They’re an Atmega328 that is arduino compatible. I plan on using my redbull Arduino to program this thing, since you need to bring your own serial interface.

If you’re anything like me, you have atrociously sloppy soldering and shaky shaky hands. I was a bit concerned about actually getting those wires soldered in without bridging the pads. I was able to pull it off though.  Here’s a video so you can see how horrible my soldering technique and equipment are.

I really don’t have any complaints about this thing, it works just like an arduino but smaller. The closest thing to a complaint is that the silk screening is a bit blurry making it difficult to read which pins are what. It isn’t horrible, but it isn’t perfect either.  We really couldn’t think of much else so we decided a haiku would cover it.

one arduino
much smaller than a quarter

Of course, if you want to follow along and see if I end up with complaints, you can watch me build these battling star wars themed R/C cars.

Filed under: arduino hacks, reviews

  • Newsletter

    Sign up for the PlanetArduino Newsletter, which delivers the most popular articles via e-mail to your inbox every week. Just fill in the information below and submit.

  • Like Us on Facebook