Planet Arduino

As connected as we are, reliable and affordable internet is still a luxury in the far reaches. [kohleick's] country home is not just remote; with temperatures dropping to -30C in the winter, it’s practically Arctic. His solution for controlling the thermostat from afar was to take advantage of the GSM network and implement a SMS-based heater controller. The unit typically operates in “antifreeze mode,” but sending a simple text message prior to visiting causes the heater to kick it up to a more comfortable setting for your arrival. Daily logs report the system’s status, and an alert will trigger when temperatures fall below a set limit, thus indicating potential faults with the heater.

The build uses a Freeduino paired with an external GSM modem for communication and an LCD to display current status and menus, which users access via three buttons on the side of the picture frame. [kohleick] connected two temperature sensors: one directly to the Freeduino’s shield and a second outside the house. After the temperature sensors detect deviance from the set point, or upon SMS instruction, the Freeduino will crank up the heat through a 5V relay attached to the home’s boiler. Head over to the Instructables page linked above for a bill of materials, schematics, and the code. The Siemens GSM modem in this build is nothing to worry about, but be careful if you try to reproduce this project with an Arduino GSM shield, or your house might really heat up.

Filed under: Arduino Hacks, Cellphone Hacks, home hacks, Microcontrollers

Ever battled SRAM limitations with your sketch on the Arduino Uno? Decided reluctantly to break out an Arduino Mega, and suffer with the resulting shield incompatibilities? Then the new Goldilocks board might be just what you're looking for in a micro-controller.

Read the full article on MAKE