Posts | Comments

Planet Arduino

Archive for the ‘barometric pressure’ Category

Gen
05

Interfacing BMP180 temperature and pressure sensor on Arduino UNO

arduino, arduino uno, barometric pressure, BMP180, pressure, Sensor, temperature Commenti disabilitati su Interfacing BMP180 temperature and pressure sensor on Arduino UNO 

BMP180_11

“Raz” over embedded-lab.com has written a tutorial on how to interface BMP180 temperature and barometric pressure sensor with Arduino UNO board. The BMP180 is a new generation sensor coming on a LGA package and it’s able to measure pressure in the range of 300 to 1100hPa using low power and achieving low noise measurements. The interface is a standard I2C and sensor is fully factory calibrated. The voltage required to power the IC is 3.3V, so your Arduino must provide 3.3V. On this tutorial the data is displayed on a 1.44″ TFT display and “Raz” moved a step further calculating the altitude from the derived pressure. Code and libraries are supplied on the link below.

Interfacing BMP180 temperature and pressure sensor on Arduino UNO - [Link]



  • Newsletter

    Sign up for the PlanetArduino Newsletter, which delivers the most popular articles via e-mail to your inbox every week. Just fill in the information below and submit.

  • Like Us on Facebook