Posts | Comments

Planet Arduino

Archive for the ‘ghost’ Category

Halloween is just around the corner, and the spooky themed tips are just starting to roll in. If you’re looking to one-up the basic store-bought decorations, and maybe teach your kid the basics of an Arduino while you’re at it — why not build a Peek-A-Boo Ghost!

Using an Arduino, two servo motors and an ultrasonic distance sensor it’s pretty easy to make this cute little ghost that covers its eyes when no one is around. They’re using cardboard for the ghost, but if you have access to a laser cutter at your hackerspace, you could make it a lot more robust using MDF or plywood.

When the ultrasonic distance sensor senses someone coming towards it, it’ll trigger the arms to move — though it’d be easy to add a small speaker element too and get some spooky music going as well!

For even more spooky hacks, check out our coverage of last year’s Halloween Night at Pololu! Including impatient severed fingers, a robotic exorcism baby, and not to mention some stabby silhouettes for your windows!


Filed under: Arduino Hacks, Holiday Hacks

[Bob’s] Pac-Man clock is sure to appeal to the retro geek inside of us all. With a tiny display for the time, it’s clear that this project is more about the art piece than it is about keeping the time. Pac-Man periodically opens and closes his mouth at random intervals. The EL wire adds a nice glowing touch as well.

The project runs off of a Teensy 2.0. It’s a small and inexpensive microcontroller that’s compatible with Arduino. The Teensy uses an external real-time clock module to keep accurate time. It also connects to a seven segment display board via Serial. This kept the wiring simple and made the display easy to mount. The last major component is the servo. It’s just a standard servo, mounted to a customized 3D printed mounting bracket. When the servo rotates in one direction the mouth opens, and visa versa. The frame is also outlined with blue EL wire, giving that classic Pac-Man look a little something extra.

The physical clock itself is made almost entirely from wood. [Bob] is clearly a skilled wood worker as evidenced in the build video below. The Pac-Man and ghosts are all cut on a scroll saw, although [Bob] mentions that he would have 3D printed them if his printer was large enough. Many of the components are hot glued together. The electronics are also hot glued in place. This is often a convenient mounting solution because it’s relatively strong but only semi-permanent.

[Bob] mentions that he can’t have the EL wire and the servo running at the same time. If he tries this, the Teensy ends up “running haywire” after a few minutes. He’s looking for suggestions, so if you have one be sure to leave a comment.


Filed under: Arduino Hacks, clock hacks


  • Newsletter

    Sign up for the PlanetArduino Newsletter, which delivers the most popular articles via e-mail to your inbox every week. Just fill in the information below and submit.

  • Like Us on Facebook