Posts | Comments

Planet Arduino

Archive for the ‘twilio’ Category

Laundry. It’s one of life’s inescapable cycles, but at least we have machines now. The downside of this innovation is that since we no longer monitor every step — the rock-beating, the river-rinsing, the line-hanging and -retrieving — the pain of laundry has evolved into the monotony of monitoring the robots’ work.

[Adam] shares his wash-bots with roommates, and they aren’t close enough to combine their lights and darks and turn it into a group activity. They needed an easy way to tell when the machines are done running, and whose stuff is even in there in the first place, so [Adam] built a laundry machine monitor that uses current sensing to detect when the machines are done running and sends a text to the appropriate person.

Each machine has a little Hall effect-sensing module that’s carefully zip-tied around its power cable. The signal from these three-wire boards goes high when the machine is running and low when it’s not. At the beginning of the load, the launderer simply presses their assigned button on the control box, and the ESP32 inside takes care of the rest.

Getting a text when your drawers are clean is about as private as it gets. Clean underwear, don’t care? Put it on a scrolling marquee.

Feb
01

Ski Resort Desk Snow Meter (Snowbird)

iobrdige, snow meter, snowbird, twilio Commenti disabilitati su Ski Resort Desk Snow Meter (Snowbird) 

As my snowboarding trip approaches, I find myself checking Utah Snowbird's snowcam (http://www.snowbird.com/snowcam.html) a few times a day, wishing for more snow to accumulate on my favorite ski resort.

So as a fun mini-project I decided to create my own Snowbird Desk Snow Meter! The Meter displays the snow accumulated in the past 24 hours and it gets updated hourly.


As a bonus feature I setup a Twilio phone line to call and get my personalized Snowbird snow report. Click Play below to hear what I get when I call my twilio number.





For more information check my Instructable http://www.instructables.com/id/Ski-Resort-Desk-Snow-Meter-Snowbird/
As my snowboarding trip approaches, I find myself checking Utah Snowbird's snowcam (http://www.snowbird.com/snowcam.html) a few times a day, wishing for more snow to accumulate on my favorite ski resort.

So as a fun mini-project I decided to create my own Snowbird Desk Snow Meter! The Meter displays the snow accumulated in the past 24 hours and it gets updated hourly.


As a bonus feature I setup a Twilio phone line to call and get my personalized Snowbird snow report. Click Play below to hear what I get when I call my twilio number.





For more information check my Instructable http://www.instructables.com/id/Ski-Resort-Desk-Snow-Meter-Snowbird/
Ott
26

Automatic Halloween Candy Dispenser

arduino, automatic halloween candy dispenser, candy, halloween, iobridge, twilio, twitter Commenti disabilitati su Automatic Halloween Candy Dispenser 

This year my Halloween project is the Automatic Halloween Candy Dispenser® triggered by TextforTreat®, CallforTreat® (powered by Twilio)and @TweetforTreat® technologies. Of course it can also be triggered from a Big Red push button, but where is the fun in that?

When trick-or-treaters show up at my house they can text, call, or tweet a code displayed on an LCD screen to get their Halloween candy. They can also push the Big Red button.

Once the candy request is made a few "special" effects are triggered by X10 modules. A low laying fog machine is activated and lights turn on while the candy shoots down from my front deck on the second floor.

* Check my Instructable write up for more detailed information.




Candy Dispenser
Control Box
Main Box
Communication Bridge
Fog Machine
Lights and accesories


Candy Dispenser


The first thing was to figure out a good way to hold the candy and dispense it. I used a plastic bucket, a metal ventilation pipe and a CD attached to a servo motor. I figured that by having the candy dispense from the side as opposed to the bottom would allow the candy to move more freely and avoid candy jams.

The ventilation pipe comes in a "U" shape, so I made a "U" shaped cut in the bottom center of the bucket. Notice I did't cut the whole "U", instead I left a piece of plastic in the middle to hold the servo motor that rotates the CD.

After I inserted the ventilation pipe I did a few cuts to allow me to expand the pipe into a sheet form. I used a couple screws and bolts to keep the sheet attached to the bucket.  The rest of the space was covered by the mighty duck tape.

I cut the CD to allow the candy flow when rotated. Also I duck taped a continuous servo inside to function as a "shaker."


Control Box

The control box is pretty simple. I drilled/dremelled a few holes to attach the big red button, ioBridge LCD screen,  power jack and the RJ45 jack.

I really like the use of CAT 5 cable to make things more modular.

Main Box

The main program runs in the Arduino Duemilanove.  When the board is initialized it immediately makes a Web call to check for the current code and displays it on the LCD screen.

The main loop is waiting for either a physical push of the big red button or to receive a remote serial message. The attached XBee module communicates with another XBee module connected to the ioBridge IO-204 module serial board.

These are the digital I/O pins configuration:
  • XBee Module (with adafruit XBee kit)
    • Pin 13 - TX 
    • Pin 12 - RX
    • Gnd and 5v
  • Big Dome Push Button
    • Pin  8 - Button NO(normally open) +  GND + 100K. 
    • 5v - COM
  • Servo 1 (continuous rotating servo used for shaking)
    • Pin  7 - Data
    • Gnd and 5v
  • Servo 2 (used to rotate the CD)
    • Pin 6 - Data
    • Gnd and 5v
  • X10 C17A (x10 devices controller)
    • Pin  3 - DTR line for C17A - DB9 pin 4
    • Pin  2 - RTS line for C17A - DB9 pin 7
    • Gnd  - DB9 pin 5
  • ioBridge 16x2 serial LCD display
    • Pin 1 - LCD Data pin
    • Gnd and 5v
Attached is the Arduino Sketch, it also includes a library to control the ioBridge LCD screen.

Code Generator

I realized that someone with mischievous intentions could just tweet-spam the @Tweetfortreat account (or less likely someone could text or call my Twilio number numerous times) and I would end up with tons of candy on the floor.

Instead, I created a REST web service using of course my favorite web development tool, Oracle Application Express http://apex.oracle.com/ , to make sure a unique and random code was generated each time candy drop request was made from text, call or Twitter.

The REST application is really simple and I recognize it can also be created using any other technologies such as LAMP or even a GCI, or Perl application.

Application Objects:
  • 1 Table (ID,CODE,SELECTED)
  • 1 Numerical Sequence to generate primary key (ID)
  • 1 Trigger before insert record that will get the ID value and append a random number to the CODE column
  • 1 public procedure to retrieve the code (where selected = 1)
  • 1 public procedure to update the code once is used and generate a new one.
So I ended up with these two URL
http:/my.apexserver.com/pls/apex/getcode
http:/my.apexserver.com/pls/apex/updatecode?code=XXXX
*If you would like to implement something with a static file instead, I would recommend using http://www.random.org/clients/http/ to get a random number and store it in file, memory, or even the arduino itself.

ioBridge Setup

The ioBridge IO-204 is used as bridge (duh!) between the arduino and the internet. I am using the ioBridge serial board to connect an XBee module.

There are two main functions that the ioBridge was used for:
  1. Request current code
     I do a GET call from the arduino to retrieve the current code from my Code Generator service using ioBridge Serial Web Services API.
     Arduino code:
     mySerial.println("[[[get|http:/my.apexserver.com/pls/apex/getcode]]]");

      
  2. Start candy dropping sequence by text, call or tweet.
     An ioBridge widget will send a start character via serial message and the candy dropping sequence will start. This widget can be called using the ioBridge Static Widget API.
This URL  is called by Twilio and by my custom Twitter alert script.

http://www.iobridge.com/widgets/static/id=[widgetID]


These are the digital I/O pins configuration:
  • ioBridge Serial Board
  • TX - RX XBee
  • RX - TX XBee
  • GND and 5v

Twilio Setup


Twilio is a web-service API for communication apps. Twilio is as simple as it gets. It only  took me a short time to get my  SMS and Voice applications up and running! I had tried in the past to create similar applications with other technologies (VoiceXML and even Google Voice) and let me tell you is not that easy.

The voice application answers the phone, plays an intro sound file and asks for the code followed by the # sign. If a code is detected Twilio will do a "GET" action to a PHP file that will lookup the current code from my Code Generator Web Service. If it matches it will call the ioBridge static widget URL and candy will be dispensed.

The SMS application has almost the same PHP code except this time instead of looking for the digits dialed  it will look for body of the SMS message.

Check the attached XML and PHP files that generate the TwiML XML.

All in all Twilio is a winner and I have plenty of other ideas for the future.

Twitter Setup


No modern internet enabled project is complete without Twitter integration, right? :) Here is mine: This time i used a bash script, twurl and a crontab job to check for replies to @tweetfortreat. This bash script is running on my Sheevaplug, but it can be run in any linux/mac machine or it could be adapted to run as .bat in windows (using scheduled tasks).

Twurl is almost like curl but for Twitter. I did some ugly parsing of the twitter RSS feed to retrieve the tweet sender, but it works!

Here is my bash script
#!/bin/bash
mycode=`curl --silent http:/my.apexserver.com/pls/apex/getcode`
twitter=`twurl /1/statuses/mentions.rss | grep "@tweetfortreat $mycode" | cut -d ':' -f1 | tail -n 1 | cut -d '>' -f2`
echo $mycode $twitter
if [ -n "$twitter" ]; then
iobridge=`curl --silent http://www.iobridge.com/widgets/static/id=[widgetID]`
newkey=`curl --silent -d "code=$mycode" http:/my.apexserver.com/pls/apex/updatecode`
update=`twurl -d "status=@$twitter The code $mycode is correct. Happy Halloween!" /1/statuses/update.xml`
echo $newkey $iobridge
fi

Crontab will only allow you to execute a script every minute and I think is fine for now. Alternatively a while loop could be used instead.
Here is my crontab entry

*/1 * * * * /script_location/HalloweenCandy.sh > /dev/null 2>&1

Conclussion and Alternatives
If my Google skills (http://lmgtfy.com/?q=automatic+halloween+candy+dispenser)serve me well there are just not many documented Automatic Halloween Candy Dispensers out there. I did run into this one which I really like but is limited to M&Ms sized candy.I found some inspiration from the dog/cat feeders built using the internet enabled ioBridge http://support.iobridge.com/projects/tag/dog-feeder/.

I hope to see more iterations of the Automatic Halloween Candy Dispenser next year. Please make sure you share all your ideas/improvements in the comments section.


Happy Halloween!
This year my Halloween project is the Automatic Halloween Candy Dispenser® triggered by TextforTreat®, CallforTreat® (powered by Twilio)and @TweetforTreat® technologies. Of course it can also be triggered from a Big Red push button, but where is the fun in that?

When trick-or-treaters show up at my house they can text, call, or tweet a code displayed on an LCD screen to get their Halloween candy. They can also push the Big Red button.

Once the candy request is made a few "special" effects are triggered by X10 modules. A low laying fog machine is activated and lights turn on while the candy shoots down from my front deck on the second floor.

* Check my Instructable write up for more detailed information.




Candy Dispenser
Control Box
Main Box
Communication Bridge
Fog Machine
Lights and accesories


Candy Dispenser


The first thing was to figure out a good way to hold the candy and dispense it. I used a plastic bucket, a metal ventilation pipe and a CD attached to a servo motor. I figured that by having the candy dispense from the side as opposed to the bottom would allow the candy to move more freely and avoid candy jams.

The ventilation pipe comes in a "U" shape, so I made a "U" shaped cut in the bottom center of the bucket. Notice I did't cut the whole "U", instead I left a piece of plastic in the middle to hold the servo motor that rotates the CD.

After I inserted the ventilation pipe I did a few cuts to allow me to expand the pipe into a sheet form. I used a couple screws and bolts to keep the sheet attached to the bucket.  The rest of the space was covered by the mighty duck tape.

I cut the CD to allow the candy flow when rotated. Also I duck taped a continuous servo inside to function as a "shaker."


Control Box

The control box is pretty simple. I drilled/dremelled a few holes to attach the big red button, ioBridge LCD screen,  power jack and the RJ45 jack.

I really like the use of CAT 5 cable to make things more modular.

Main Box

The main program runs in the Arduino Duemilanove.  When the board is initialized it immediately makes a Web call to check for the current code and displays it on the LCD screen.

The main loop is waiting for either a physical push of the big red button or to receive a remote serial message. The attached XBee module communicates with another XBee module connected to the ioBridge IO-204 module serial board.

These are the digital I/O pins configuration:
  • XBee Module (with adafruit XBee kit)
    • Pin 13 - TX 
    • Pin 12 - RX
    • Gnd and 5v
  • Big Dome Push Button
    • Pin  8 - Button NO(normally open) +  GND + 100K. 
    • 5v - COM
  • Servo 1 (continuous rotating servo used for shaking)
    • Pin  7 - Data
    • Gnd and 5v
  • Servo 2 (used to rotate the CD)
    • Pin 6 - Data
    • Gnd and 5v
  • X10 C17A (x10 devices controller)
    • Pin  3 - DTR line for C17A - DB9 pin 4
    • Pin  2 - RTS line for C17A - DB9 pin 7
    • Gnd  - DB9 pin 5
  • ioBridge 16x2 serial LCD display
    • Pin 1 - LCD Data pin
    • Gnd and 5v
Attached is the Arduino Sketch, it also includes a library to control the ioBridge LCD screen.

Code Generator

I realized that someone with mischievous intentions could just tweet-spam the @Tweetfortreat account (or less likely someone could text or call my Twilio number numerous times) and I would end up with tons of candy on the floor.

Instead, I created a REST web service using of course my favorite web development tool, Oracle Application Express http://apex.oracle.com/ , to make sure a unique and random code was generated each time candy drop request was made from text, call or Twitter.

The REST application is really simple and I recognize it can also be created using any other technologies such as LAMP or even a GCI, or Perl application.

Application Objects:
  • 1 Table (ID,CODE,SELECTED)
  • 1 Numerical Sequence to generate primary key (ID)
  • 1 Trigger before insert record that will get the ID value and append a random number to the CODE column
  • 1 public procedure to retrieve the code (where selected = 1)
  • 1 public procedure to update the code once is used and generate a new one.
So I ended up with these two URL
http:/my.apexserver.com/pls/apex/getcode
http:/my.apexserver.com/pls/apex/updatecode?code=XXXX
*If you would like to implement something with a static file instead, I would recommend using http://www.random.org/clients/http/ to get a random number and store it in file, memory, or even the arduino itself.

ioBridge Setup

The ioBridge IO-204 is used as bridge (duh!) between the arduino and the internet. I am using the ioBridge serial board to connect an XBee module.

There are two main functions that the ioBridge was used for:
  1. Request current code
     I do a GET call from the arduino to retrieve the current code from my Code Generator service using ioBridge Serial Web Services API.
     Arduino code:
     mySerial.println("[[[get|http:/my.apexserver.com/pls/apex/getcode]]]");

      
  2. Start candy dropping sequence by text, call or tweet.
     An ioBridge widget will send a start character via serial message and the candy dropping sequence will start. This widget can be called using the ioBridge Static Widget API.
This URL  is called by Twilio and by my custom Twitter alert script.

http://www.iobridge.com/widgets/static/id=[widgetID]


These are the digital I/O pins configuration:
  • ioBridge Serial Board
  • TX - RX XBee
  • RX - TX XBee
  • GND and 5v

Twilio Setup


Twilio is a web-service API for communication apps. Twilio is as simple as it gets. It only  took me a short time to get my  SMS and Voice applications up and running! I had tried in the past to create similar applications with other technologies (VoiceXML and even Google Voice) and let me tell you is not that easy.

The voice application answers the phone, plays an intro sound file and asks for the code followed by the # sign. If a code is detected Twilio will do a "GET" action to a PHP file that will lookup the current code from my Code Generator Web Service. If it matches it will call the ioBridge static widget URL and candy will be dispensed.

The SMS application has almost the same PHP code except this time instead of looking for the digits dialed  it will look for body of the SMS message.

Check the attached XML and PHP files that generate the TwiML XML.

All in all Twilio is a winner and I have plenty of other ideas for the future.

Twitter Setup


No modern internet enabled project is complete without Twitter integration, right? :) Here is mine: This time i used a bash script, twurl and a crontab job to check for replies to @tweetfortreat. This bash script is running on my Sheevaplug, but it can be run in any linux/mac machine or it could be adapted to run as .bat in windows (using scheduled tasks).

Twurl is almost like curl but for Twitter. I did some ugly parsing of the twitter RSS feed to retrieve the tweet sender, but it works!

Here is my bash script
#!/bin/bash
mycode=`curl --silent http:/my.apexserver.com/pls/apex/getcode`
twitter=`twurl /1/statuses/mentions.rss | grep "@tweetfortreat $mycode" | cut -d ':' -f1 | tail -n 1 | cut -d '>' -f2`
echo $mycode $twitter
if [ -n "$twitter" ]; then
iobridge=`curl --silent http://www.iobridge.com/widgets/static/id=[widgetID]`
newkey=`curl --silent -d "code=$mycode" http:/my.apexserver.com/pls/apex/updatecode`
update=`twurl -d "status=@$twitter The code $mycode is correct. Happy Halloween!" /1/statuses/update.xml`
echo $newkey $iobridge
fi

Crontab will only allow you to execute a script every minute and I think is fine for now. Alternatively a while loop could be used instead.
Here is my crontab entry

*/1 * * * * /script_location/HalloweenCandy.sh > /dev/null 2>&1

Conclussion and Alternatives
If my Google skills (http://lmgtfy.com/?q=automatic+halloween+candy+dispenser)serve me well there are just not many documented Automatic Halloween Candy Dispensers out there. I did run into this one which I really like but is limited to M&Ms sized candy.I found some inspiration from the dog/cat feeders built using the internet enabled ioBridge http://support.iobridge.com/projects/tag/dog-feeder/.

I hope to see more iterations of the Automatic Halloween Candy Dispenser next year. Please make sure you share all your ideas/improvements in the comments section.


Happy Halloween!


  • Newsletter

    Sign up for the PlanetArduino Newsletter, which delivers the most popular articles via e-mail to your inbox every week. Just fill in the information below and submit.

  • Like Us on Facebook