Planet Arduino

Everyone’s favorite safety-tie-wearing-eccentric-inventor, [Colin Furze], is back at it again, this time making a flamethrower guitar — sponsored by Intel!?

As an ex-plumber, [Furze] is a master fabricator, and he’s brought many amazing mechanical inventions to life. In this video, perhaps for the first time, he’s integrated an Intel Curie Arduino in it, for a bit more fine control.

He’s hacked apart a couple of propane blow-torches, milled and lathed his own fittings and manifolds, and even TIG welded together a pressure vessel for the fuel — kids, do not try this at home!

The two blowtorches act as pilot lights for a third gas supply line to make the big firing explosion — the plan for the Arduino? To blast off the fire at certain parts during the song, add timing, or even just set up some cool patterns.

Did we mention he’s also got his own custom propane fueled guitar amp to go with it??

[Caleb’s] going to want to beef up his flamethrower ukulele if he wants to go toe-to-toe with [Colin]! Stay tuned for next week when he tests it out.

In support of the TBS show “America’s Greatest Makers,” YouTuber/plumber/stuntman/inventor Colin Furze recently took on the challenge of turning a bass guitar into a flamethrower with the help of a Genuino 101. Because after all, there’s nothing more metal than fire bursting as a rockstar shreds on-stage.

To bring this project life, Fruze added a pair of modified blow torches to the neck of the guitar and sawed off part of the instrument’s base to fit in the firing mechanisms. As you can see in his tutorial video below, the body is equipped with a gas reservoir on top, solenoid valves, a few switches, a gas supply to the blow torches, an inlet pipe, and some other components.

The Maker even converted his amp to house a gas tank, along with a speaker, the Genuino board and a relay shield that enables him to synchronize flames to certain musical patterns and sequences.

It goes without saying that you may not want to try this at home…

In support of the TBS show “America’s Greatest Makers,” YouTuber/plumber/stuntman/inventor Colin Furze recently took on the challenge of turning a bass guitar into a flamethrower with the help of a Genuino 101. Because after all, there’s nothing more metal than fire bursting as a rockstar shreds on-stage.

To bring this project life, Fruze added a pair of modified blow torches to the neck of the guitar and sawed off part of the instrument’s base to fit in the firing mechanisms. As you can see in his tutorial video below, the body is equipped with a gas reservoir on top, solenoid valves, a few switches, a gas supply to the blow torches, an inlet pipe, and some other components.

The Maker even converted his amp to house a gas tank, along with a speaker, the Genuino board and a relay shield that enables him to synchronize flames to certain musical patterns and sequences.

It goes without saying that you may not want to try this at home…