Planet Arduino

Will Netflix’s nostalgic hit Stranger Things be back for a fourth series anytime soon? We could pull out a Ouija board and ask the spirits, but we’d much rather ask closer to the source, i.e. a spirit in the upside down. And you know that the best way to do that is with LEDs — one for each letter of the alphabet so the spirit can spell out their messages.

Although contact with the Demogorgon’s world isn’t likely with [danjovic]’s open-source Stranger Things board, you are guaranteed to get the time spelled out for you every minute, as in, ‘it’s twenty-five (or six) to four’. And if you want to freak out your unwitting friends, you can covertly send messages to it from your phone.

There are two versions now — the original desktop version, and one that hangs on the wall and uses a high-quality photo print for the background. Both use an ESP-01 and an Arduino to help drive the 26 RGB LEDs, and use a DS2321 real-time clock for timing. We love the enameled wiring job on the wall-mount version, but the coolest part has to be dual language support for English and Brazilian Portuguese. You can check out demos of both after the break.

We’ve seen many a word clock around here, but this is probably one of the few that’s dripping with pop culture. If it’s stunning modernism you want, take a look at this painstakingly-constructed beauty.

[rudolph] was at a loss on what to get his niece for Christmas. It turns out she’s a huge fan of Stranger Things, so the answer was obvious: make her an alphabet wall she can control!

Downsizing the scale to fit inside a document frame, [rudolph] calls their gift rudLights, and a key parameter of this build was to make it able to display any phrases sent from their niece’s Amazon Fire tablet instead of constantly displaying hard-coded phrases. To do so, it has a HC-05 Bluetooth module to forward the commands to the NeoPixel LEDs running on a 5V DC power supply.

[rudolph] enlisted the help of their son to draw up the alphabet display — printed straight onto thematically decorative wallpaper — and cut out holes in the light bulbs for the LEDs.  Next up was cut some fibre board as a firm backing to mount the electronics inside the frame and drill holes for the NeoPixels. It was a small odyssey to cut and solder all the wires to the LEDs, but once done, [rudolph] divided their rudLight alphabet into three rows and added capacitors to receive power directly.

[rudolph] has provided the code they used for this project — just be sure to change the output pin or any other modifications as relevant to your build. They’ve even created an app to make controlling the rudLights easier. If Bluetooth isn’t your thing then [rudolph] is working on building an Arduino Pro Mini version, but no word on when that will be done.

We love a good prop or inspired replica here at Hackaday, so this framed Alphabet Wall is in good company.

The Netflix series Stranger Things has become a fan-favorite for Makers, especially for those looking to recreate a light-up alphabet wall of their own. While we’ve seen some awesome attempts over the last couple of weeks, Imgur user “MrWalkway” has decided to create a more portable version in the form of his Halloween costume.

The show-inspired costume uses an Adafruit LED strand, an Arduino Nano, a Bluetooth receiver, a battery, and some other components to allow his shirt to accept different messages and light patterns. The instructions are sent from a Bluetooth terminal on his phone over a serial connection to the Arduino.

As you can see on the project’s Imgur page, the electronics are all housed within a 3D-printed control box that gets tucked away in his pocket while the 25 LEDs are stitched to the inside of the shirt.