Planet Arduino

Pinball machines may seem like a good Maker project, but the mechanical components are quite involved. “Joesinstructables,” however, decided to take on this project on using an Erector Set, solenoids, and an Arduino board. In order to get around the challenge of using a heavy steel ball, he instead used a much lighter ping pong ball, sensed in the game by laser tripwires.

A number of solenoids propel the ball around and sound a service desk bell whenever a target is hit–one to three times depending on the difficulty level. Once the ball comes to rest in a target, a laser tripwire automatically triggers a solenoid to eject the ball, putting it back in play.

You can see more info on this build here, or even check out an earlier version for more inspiration!

Pinball machines may seem like a good Maker project, but the mechanical components are quite involved. “Joesinstructables,” however, decided to take on this project on using an Erector Set, solenoids, and an Arduino board. In order to get around the challenge of using a heavy steel ball, he instead used a much lighter ping pong ball, sensed in the game by laser tripwires.

A number of solenoids propel the ball around and sound a service desk bell whenever a target is hit–one to three times depending on the difficulty level. Once the ball comes to rest in a target, a laser tripwire automatically triggers a solenoid to eject the ball, putting it back in play.

You can see more info on this build here, or even check out an earlier version for more inspiration!

“Tony the Pinball Wizard” has successfully 3D-printed a fully-functional pinball machine.

The retired software engineer provides a detailed writeup, beginning with pinball’s roots in the 1700s to its eventual fall from popularity in the 1990s and 2000s. If you find this interesting, you could likely pick one up on Craigslist, but Tony instead decided to build his own.

This process isn’t for the feint of heart though, as it took him over 200 hours to design the game, and another 1,200 or more hours to 3D print everything. Materials included 8.5 kilometers of filament, of which 85 types were used. The whole thing is powered by a pair of Arduino Mega boards, needed to accommodate the massive number of inputs and outputs required.

The machine was brought to life and displayed inside 3D FilaPrint’s stand at recent industry trade show. You can see Tony’s excellent project in action below and read all about it here.

“Tony the Pinball Wizard” has successfully 3D-printed a fully-functional pinball machine.

The retired software engineer provides a detailed writeup, beginning with pinball’s roots in the 1700s to its eventual fall from popularity in the 1990s and 2000s. If you find this interesting, you could likely pick one up on Craigslist, but Tony instead decided to build his own.

This process isn’t for the feint of heart though, as it took him over 200 hours to design the game, and another 1,200 or more hours to 3D print everything. Materials included 8.5 kilometers of filament, of which 85 types were used. The whole thing is powered by a pair of Arduino Mega boards, needed to accommodate the massive number of inputs and outputs required.

The machine was brought to life and displayed inside 3D FilaPrint’s stand at recent industry trade show. You can see Tony’s excellent project in action below and read all about it here.