Planet Arduino

Arduino co-founder Massimo Banzi and Maker Media’s Dale Dougherty will be in Brussels next week to help kick off European Maker Week at the Opening Conference. During their keynote, they will address European citizens in hopes of inspiring Makers to build projects throughout the weeklong celebration taking place all over the continent. Those wishing to learn more can do so by checking out the agenda and booking their free ticket for Monday, May 30th at the European Committee of the Regions.

European Maker Week is the first initiative promoted by European Commission and implemented by Maker Faire Rome, in collaboration with Startup Europe, to raise awareness around the significance of the Maker culture and its ecosystem, as well as foster creativity and innovation in schools.

Europe is not only home to the highest number of fab labs, Makerspaces, and hackerspaces in the world, it’s also the birthplace of disruptive projects like Arduino, Raspberry Pi,  micro:bit, and RepRap. Every year, there are over 50 Maker Faires, Mini Maker Faires, and the flagship Maker Faire Rome, which drew attention from 100,000-plus visitors in 2015.

European Maker Week, which will be held May 30th to June 5th, will play host to more than 450 events across 28 countries. Click on the map below to find the the event nearest you:

Arduino and Genuino Education is a worldwide-leading school initiative bringing technology into the hands of teachers and students to create a more inventive learning experience. It offers multiple platforms, including research-based projects like PELARS and in-class programs such as Creative Technologies in the Classroom (CTC), all of which are present at this year’s Maker Faire Bay Area.

With CTC, students are able to learn basic programming, electronics, and mechanics concepts in an approachable, playful way through a series of coding projects and easy-to-assemble experiments.

Arduino’s one-of-a-kind STEM program has been implemented in nearly 500 schools throughout the globe, resulting in an overwhelming satisfaction rate among both students and teachers alike. 95% of instructors continue to use the curriculum in their classrooms year after year, while more than 13,000 students have already participated.

CTC 101 — running on Arduino 101 — is divided into four distinct stages:

1. Teacher training (one week)
2. Themed modules (five modules, 10 weeks)
3. Student projects (nine weeks)
4. Technology fair (one day)

Each program comes with a CTC 101 Toolbox consisting of:

• Sets of electronics components and pre-cut mechanical parts
• 25+ hands-on projects
• Live training for teachers
• Free online documentation and course materials
• Support forums for teachers and students

Interested? Be sure to come visit us at Maker Faire Bay Area to learn more and fill out this form so we can get in touch!

Maker Faire is a three-day, family-friendly event that has been celebrating the DIY Movement for the last 10 years. The ‘Greatest Show & Tell on Earth’ is designed for creative, innovative people of all ages and backgrounds, who like to tinker and love to make things.

In just a few days, the Arduino team will be in attendance for the 11th annual Maker Faire Bay Area as a Goldsmith Sponsor. Those heading to the San Mateo on May 20th-22nd will want to swing by our booth (#2321) and join us for some inspiring talks, especially the highly-anticipated State of Arduino by Massimo Banzi on Saturday at 12:30pm.

We’ve been preparing a series of demos to showcase the family of Arduino tools for the Internet of Things through our Arduino Create platform. Those who come by our booth will have the chance to experience the following firsthand:

• Cloud Sensor Station | “Make Sense of Your Data”
  The Cloud Sensor Station is equipped with four different sensors: gas detection, light intensity, motion detection (infrared) and temperature/humidity. These four sensors send values to the Arduino Cloud so that you can see real-time results of the collected data from everywhere.
• Yún Camera | “Lights! Camera! Facebook!”
  The Yún Camera captures photos at the press of a button and then automatically uploads them onto Facebook. (We’re sensing plenty of selfies in our near future!)
• Yún Message | “Leave a Message and I’ll Show It Back”
  The Yún Message is a smart desk, developed in collaboration with Opendesk, that displays custom messages on an LED matrix. This piece of smart furniture lets users share a reminder or note through a webpage. Come and leave a note or… do it online!
• Twitter Printer | “The IoTweet!”
  This connected thermal printer running on MKR1000 will automatically print tweets from all over the world with the #PrintArduino hashtag. (Look forward to seeing what you come up with!)

Additionally, we’ll be showcasing our Creative Technologies in the Classroom (CTC) program, which is a collaborative learning curriculum designed for schools that wish to incorporate emerging technologies into their existing technology classes.

Whether you’re a teacher or student, come and discover how to explore electronics through a series of hands-on coding projects that’ll provide you with the foundations of programming, electronics and mechanics.

Aside from some of our latest products and projects, we’ll also play host to several members of our growing open-source ecosystem and partners like Intel, ARM and Atmel, to name just a few.

Have a question about Arduino? Looking to get started but don’t know how? Beginners, or even experienced users, will have the chance to get their questions answered inside our booth. We’ve set aside an area where you can speak to our team of experts, from your recent invention to one of our boards. What’s more, you’ll even be able to take home an assortment of Arduino SWAG: stickers, pins and other cool giveaways!

Can’t wait to see everyone soon! In the meantime, stay tuned as we’ll be posting a confirmed agenda of scheduled talks in the next few days. For everything else, check out Maker Faire’s official site!

Last friday in Rome during the press conference of Maker Faire Rome 4th edition, Riccardo Luna together with Massimo Banzi announced that next October the event is going to become “better, bigger and stronger”.
A new location by Fiera di Roma building will host six pavilions in an area of over 100.000 sq.m. for makers, visitors, conferences, seminars and workshops. The event promoted by the Rome Chamber of Commerce and powered by its Innovation Unit “AssetCamera “ is once more curated by Massimo Banzi, Arduino co-founder, along with Riccardo Luna, Italian Digital Champion.

The topics featured at Maker Faire Rome 2016 are going to be home automation, re-use, drones and robots, 3D printing, digital manufacturing, industry 4.0, IoT – Internet of things, mobility, safety & security, food , fashion, music and especially Food & Nutrition.Together with the Future Food Institute (FFI), trust voted to food and innovation, Maker Faire will focus on the intersection between food and technology and will deepen the relationship between nutrition, health & wellbeing. The “Call 4 Makers” 2016 will open on April 18th and will close on June 5th.

Maker Faire Rome is also looking for amazing project with a “Call for BigBang Projects”  open until March 31^st.  The call will consider large-scale, entertaining, high impact, interactive projects. Installations and performances proposals will be welcome, too. The goal is to create the most immersive scenery one could dream of for a Faire of such character.

In the meanwhile take a look at the European Maker Week, an entire week of makers’ events, from May 30th to June 5th,  promoted by The European Commission and implemented by Maker Faire Rome in collaboration with Startup Europe, the event:

aims to draw European citizens to the “Maker world” thanks to the aid of Fablabs, Makerspaces, Hackerspaces and the hardware startups environment. The goals of European Maker Week are two folds: create awareness about the importance of the maker culture to foster an education of creativity and innovation in all schools across Europe; build bridges between local authorities and media and the main players of their own local makers ecosystems. It is of particularly importance to reach out to new players (e.g. Schools) who have never organized a maker event before.

Last June Arduino partnered with Seeedstudio to manufacture Genuino boards for the chinese market and during Maker Faire Rome Massimo Banzi took part to an interesting panel to promote  4 chinese delegates from business, education, design and research domains presenting their work and discussing what does it mean to be a maker in China. (in the pic from left to right, Lin, Massimo, Alessio, Jin, Chenille & Flamingo).

The panel titled Making beyond the Wall and moderated by Alessio Jacona tried to address the growing maker movement in China which is not so visible to the European community while the hype of manufacture in Shenzhen, the Chinese Silicon Valley, is gaining more and more international media attention.

Flamingo was the first presenter of the session. Indeed he was also the first person to use Arduino boards in China back in 2007. As an evangelist, he taught physical interactions in China Central Academy of Fine Arts and even started the digital firm K1ND Beijing with Ogilvy China, which focus on interactive design with open source technologies for business projects.

He introduced LightBot (watch video on youku) made in collaboration with Jun Huang, an architect based in China. It’s an installation using LEDs as a brush to draw on light-sensitive canvas. The material on the wall glows after being exposed to light, particularly ultraviolet light, and fades away after some time. Lightbox is powered by an Arduino controlling 1024 LED lights installed on the pallet and stepper motors to control the movement.

Then it was the turn for  Jin  introducing Minibuilder and Candy Project (we featured her work in our blog earlier) created during her fellowship at Iaac. With her international background, Jin explained how she realized how the culture of making in China is focusing more on hardware startups with strong potential to accelerate thanks to great manufacturing opportunities. Whereas in the West, people see it more as a hobby or prefer to explore the conceptual development in a lab environment.  Nowadays she is implementing a new VR projects in China.

Later Lin explained his work as a tutor at the University of Science and Technology in Beijing and also his commitment as a community manager of mechanics and robotics in arduino.cn forum, the community of Arduino fans who also participated to Arduino Day. He worked on various projects and applied Arduino in hemiplegia rehabilitation equipment through sensor feedback and in a gearbox to detect malfunctions through vibration, temperature and stress.

Last but not least, Chenille talked about how he wrote the first book about Arduino in China and more recently, translated the third edition of Getting started with Arduino book into Chinese. He’s now working on a brainwave-controlled music player.

The panel was a good chance to present to an european crowd real experiences from the voice of chinese makers and sharing good practices for future collaborations.

Are you based in China and  want to share a project made with an Arduino or Genuino board? Submit it to the blog, we’d like to feature it and tell your story!

Last weekend we were in Rome to take part to the third edition of Maker Faire Rome. With more than 100.000 participants, the event confirmed itself as the biggest Maker Faire outside of US. We thank you all for visiting our booth and express your support to Arduino.cc community.

On Saturday we had a special announcement to make, Intel and Massimo Banzi were on the main stage presenting the collaboration on the Arduino 101 and Genuino 101:

During the three days makers, designers, kids and parents, and many more visited the Genuino Booth and the Maker Store to see the new Arduino’s sister brand Genuino boards, explore the interactive installations and chat with the Arduino team:

Massimo Banzi met  many fans and took part to a lot of selfies :

Browse the gallery of all pictures on Arduino account on Flickr. And see you at Maker Faire Rome 2016!

Today during Opening Conference at Maker Faire Rome, Josh Walden Senior Vice President of Intel Corporation and Massimo Banzi, co-founder of Arduino, announced the upcoming release of Arduino 101 (U.S.) and Genuino 101 (outside the U.S.). The board features a 32-bit Intel® Quark™ microcontroller for minimal power consumption, 384 kB of flash memory, 80 kB of SRAM (24kB available for sketches), an integrated DSP sensor hub, Bluetooth* Low Energy radio, and 6-axis combo sensor with accelerometer and gyroscope.

We collaborated with Intel to provide the maker community an affordable learning and development board ideal for entry-level makers and education environments and also the first widely available development board based on the tiny, low-power Intel Curie  module.

Josh Walden explained the new partnership with Arduino:

“Empowering budding entrepreneurs and young students has always been a priority for Intel, and by partnering with Arduino, we are bringing the power of Intel to a new generation of makers. With the advanced features of the Intel Curie module embodied in the Arduino 101 board, young learners as well as developers can now bring to life truly unique, smart and connected creations.”

Massimo Banzi added:

“We worked closely with Intel on the development of this board and are expanding our educational courseware to incorporate the connectivity and advanced features expected by today’s student developers. Through our work with Intel, we’re able to reach a global community of entry-level makers and students with a comprehensive introduction to physical computing and now with a more advanced, powerful technology solution that will help them bring their creative visions to reality.”

Arduino 101 will be available in the first quarter of 2016 for a suggested retail price of US$30 (approximately 27 euros). The Intel-manufactured board will be sold under the Arduino 101 brand in the United States and under the Genuino 101 brand outside the United States. It will be also available through catalog distributors and retailers selling other Intel maker and innovator products such as Amazon, Conrad Electronic, Farnell Element 14, Microcenter, Mouser, Radio Shack, RS Components and SparkFun.

In the meanwhile Arduino 101 will be incorporated into the Creative Technologies in the Classroom (CTC) physical computing curriculum developed and tested by our team and currently deployed in over 300 schools. CTC is the world’s first formal physical computing curriculum for elementary and secondary school classrooms and provides educators with the tools, support and confidence needed to introduce their students to the foundations of programming, electronics and mechanics.

Intel will work closely with us to bring the CTC program to schools across the globe in coming years. As it is introduced to classrooms, Arduino 101 will nurture the next generation of technology industry professionals, entrepreneurs and inventors!

From October 16th to 18th, most of us will be participating to the third edition of Maker Faire Rome. We’re setting up an amazing booth showcasing Genuino boards, Arduino Create, Casa Jasmina installations, educational projects from Creative Technologies in the Classroom (CTC), the new Genuino Starter Kit and much more!

We’ll be at Maker Faire Rome all three days at our new Genuino booth, right next to the Maker Store where, for the first time, you’ll be able to purchase Genuino Uno and Genuino Mega!

Take a look at the map below to see where we are (in front of Pavillion U) and click on it if you want to download a PDF version.

Here’s a little preview of what’s new at our booth:

Genuino Modules
The Genuino Modules aim at providing the user a breadboard-less experience in building interactive electronic systems. The family of products contains a Hub, a Shield and umpteen number of individual modules. The Hub is a microcontroller board by itself, based on the ATmega32u4. The Shield is an add-on board that can be mounted onto another board (like Uno). The modules can be used by connecting them directly to the Hub, or to another Genuino or Arduino board using the Shield.

Eslov
The Eslov project is Genuino’s open-source, smart modular development platform made of a hub that connects to a computer, and a series of smart blocks. Each block features different functions, from analog sensors (like LDRs or potentiometers), to gyroscopes, accelerometers or even digital servo motors.
The different blocks automatically identify themselves in the Visual IDE when plugged to their hub. You can then virtually connect the blocks to one another by drawing pipes between sensor and actuator blocks. Without programming a single line of code, it’s possible to build complex prototypes like a seismic detector, a pet tracking device, or your own fitness band. Each block comes with a default firmware ready to run as part of the Eslov platform, but it is also possible to use it in combination with any of the existing Genuino or Arduino boards as a smart device connected via I2C.

Arduino Create 
Arduino Create is a platform that simplifies making a project as a whole, without having to switch between many different tools to manage the various aspects of whatever you are making.
You can write code and upload sketches to any Arduino & Genuino board directly from the browser, store all your sketches online, and access them from any device. The web-based software (IDE) offered by the Arduino Create platform is always up-to-date, including the latest Libraries and Cores, without having to install anything. Boards around you are automatically available in one single dropdown. You can add Schematics and Layout PNGs to your sketches, so that you have in one place all the core elements of your project.

During the three days you can also play with some cool interactive installations, among which:

Colour Theremin
The theremin is a musical electronic instrument that plays monophonic melodies by hand gestures. In this version, Colour Theremin creates a color ‘symphony': its intensity and shade are controlled by the movements of hands. The installation is based on a FastLED library by Daniel Garcia and Mark Kriegsman and it’s running on a Genuino Uno, an LCD shield, two ultrasound sensors, one pot for speed and 122 WS2812b pixels.

(S)passoUno
A DIY Live Stop Motion Tool heavily based on the work of Alexandre Quessy’s ToonLoop (2009), edited and used in Arduino and Processing workshop by Davide Gomba and Mirco Piccin.
(S)passoUno offers the player the possiblity to easily create a custom animation positioning objects on a lasercut board. Add a frame by pressing the Big Red Button, erase the last frame by pressing the Big Black Button, choose a sequence, add colors, add symmetry effects and enjoy the result!

(s)passo uno

Ready to celebrate the maker movement with us? Add the following events to your agenda:

• Friday, 16th October at 11.00am - During the Opening Conference “Life with the Machines” taking place at Aula Magna of Sapienza, Massimo Banzi will have a keynote and an important announcement.
• Saturday 17th October at 4.30pm – Massimo Banzi and Bruce Sterling will talk about “Casa Jasmina, the IoT for real people” at Room 10 of the Maker Faire (check map above).

Share your pictures and thoughts on social media channels using the hashtag #MFR15 and #Genuino

Get your discounted ticket to Maker Faire Rome (promo valid until October 14th –  h.18).

From October 16th to 18th, most of us will be participating to the third edition of Maker Faire Rome. We’re setting up an amazing booth showcasing Genuino boards, Arduino Create, Casa Jasmina installations, educational projects from Creative Technologies in the Classroom (CTC), the new Genuino Starter Kit and much more!

We’ll be at Maker Faire Rome all three days at our new Genuino booth, right next to the Maker Store where, for the first time, you’ll be able to purchase Genuino Uno and Genuino Mega!

Take a look at the map below to see where we are (in front of Pavillion U) and click on it if you want to download a PDF version.

Here’s a little preview of what’s new at our booth:

Genuino Modules
The Genuino Modules aim at providing the user a breadboard-less experience in building interactive electronic systems. The family of products contains a Hub, a Shield and umpteen number of individual modules. The Hub is a microcontroller board by itself, based on the ATmega32u4. The Shield is an add-on board that can be mounted onto another board (like Uno). The modules can be used by connecting them directly to the Hub, or to another Genuino or Arduino board using the Shield.

Eslov
The Eslov project is Genuino’s open-source, smart modular development platform made of a hub that connects to a computer, and a series of smart blocks. Each block features different functions, from analog sensors (like LDRs or potentiometers), to gyroscopes, accelerometers or even digital servo motors.
The different blocks automatically identify themselves in the Visual IDE when plugged to their hub. You can then virtually connect the blocks to one another by drawing pipes between sensor and actuator blocks. Without programming a single line of code, it’s possible to build complex prototypes like a seismic detector, a pet tracking device, or your own fitness band. Each block comes with a default firmware ready to run as part of the Eslov platform, but it is also possible to use it in combination with any of the existing Genuino or Arduino boards as a smart device connected via I2C.

Arduino Create 
Arduino Create is a platform that simplifies making a project as a whole, without having to switch between many different tools to manage the various aspects of whatever you are making.
You can write code and upload sketches to any Arduino & Genuino board directly from the browser, store all your sketches online, and access them from any device. The web-based software (IDE) offered by the Arduino Create platform is always up-to-date, including the latest Libraries and Cores, without having to install anything. Boards around you are automatically available in one single dropdown. You can add Schematics and Layout PNGs to your sketches, so that you have in one place all the core elements of your project.

During the three days you can also play with some cool interactive installations, among which:

Colour Theremin
The theremin is a musical electronic instrument that plays monophonic melodies by hand gestures. In this version, Colour Theremin creates a color ‘symphony': its intensity and shade are controlled by the movements of hands. The installation is based on a FastLED library by Daniel Garcia and Mark Kriegsman and it’s running on a Genuino Uno, an LCD shield, two ultrasound sensors, one pot for speed and 122 WS2812b pixels.

(S)passoUno
A DIY Live Stop Motion Tool heavily based on the work of Alexandre Quessy’s ToonLoop (2009), edited and used in Arduino and Processing workshop by Davide Gomba and Mirco Piccin.
(S)passoUno offers the player the possiblity to easily create a custom animation positioning objects on a lasercut board. Add a frame by pressing the Big Red Button, erase the last frame by pressing the Big Black Button, choose a sequence, add colors, add symmetry effects and enjoy the result!

(s)passo uno

Ready to celebrate the maker movement with us? Add the following events to your agenda:

• Friday, 16th October at 11.00am - During the Opening Conference “Life with the Machines” taking place at Aula Magna of Sapienza, Massimo Banzi will have a keynote and an important announcement.
• Saturday 17th October at 4.30pm – Massimo Banzi and Bruce Sterling will talk about “Casa Jasmina, the IoT for real people” at Room 10 of the Maker Faire (check map above).

Share your pictures and thoughts on social media channels using the hashtag #MFR15 and #Genuino

Get your discounted ticket to Maker Faire Rome (promo valid until October 14th –  h.18).

This week New York City is the city of Makers, with Makercon conference and World Maker Faire coming up on our agenda!

You can begin on September 24th, with Massimo Banzi taking part to the session TECH: Cheaper, Faster, Better of Makercon (at 3.30pm local time) to discuss the future of maker development platforms – particularly microcontroller boards – and they paths toward being more powerful, less expensive, and more accessible to a broader range of Makers than ever before.

In the meanwhile, watch the video from 2014 edition:

On the weekend, September 26th and 27th, we’ll be joining Atmel booth in Zone 3 for the 6th annual World Maker Faire. We’ll be exhibiting some of our latest products and cool projects made with Arduino.

Here’s a memo of presentations made by Arduino team:

Saturday h.1.00 PM to 1.30 PM Center Stage – NYSCI Auditorium
State of Arduino by Massimo Banzi

Saturday 3:15 PM —3:30 PM Center Stage – NYSCI Auditorium
Who Are You Making For?  by Tom Igoe
Tom will share a few stories of makers whose work has inspired him in and out of the classroom, and discuss how their stories and motivations led to the things they’ve made.

Saturday 11:30 AM — 11:45 AM  Zone 3 – Make: DIY
Getting Started with Arduino (3rd edition) by Michael Shiloh
Co-author with Massimo Banzi of ‘Getting Started with Arduino’, Michael takes you through the microcontroller’s latest iterations.

Sunday 11:15AM – 11:30 AM Zone 3 – Make: DIY
Getting Started with Arduino (3d edition) by Michael Shiloh
Co-author with Massimo Banzi of ‘Getting Started with Arduino’, Michael takes you through the microcontroller’s latest iterations.