Posts | Comments

Planet Arduino

Archive for the ‘vs1002d’ Category

ott
27

Arduino standalone MP3 player

arduino, mp3, vs1002d, vs1003, vs1053 Commenti disabilitati su Arduino standalone MP3 player 

ArduinoMP3

by Jose Daniel Herrera @ arduino-cool.blogspot.com:

I present this new Arduino project: A full MP3 player based on Arduino.
As you can see in the photo, the idea was to build a standalone player, in the style of antique radios or ‘tapes’, in the age of Iphones ….
The player uses a small module based on the VS1002d chip (now discontinued, but who had a drawer). The module in question I bought at Futurlec . Currently you can get similar modules on ebay for a bit more than 10$, although the chip is the VS1003 o VS1053. You can also use a SparkFun MP3 shield, but significantly more expensive (this shield already includes an SD slot).
The three chips are quite compatible in terms of programming, and indeed almost all initialization the I have taken from the library to the SparkFun MP3 Shield ;-)

[via]

Arduino standalone MP3 player - [Link]

nov
15

Arduino Mp3 Player – Arduino JukeBox

IC, jukebox, mp3, mp3 player, music, vs1002d, vs1003, vs1053 Commenti disabilitati su Arduino Mp3 Player – Arduino JukeBox 

A full Arduino MP3 player using a SD card and a MP3 module based on a chip from VLSI (VS1002d, VS1003 VS1053). The player includes a small amplifier and two speakers, making it a small Jukebox in the age of Ipods. The project includes a small library for the management of the MP3 and the SD chip. A Funny Arduino project ..

via [arduino-guay]

nov
08

Arduino MP3 Jukebox

arduino hacks, digital audio hacks, jukebox, mp3, sd, vs1002d Commenti disabilitati su Arduino MP3 Jukebox 

Here’s an inexpensive Arduino-based MP3 Jukebox (translated) which [Jose Daniel Herrera] put together.

He spent some time making sure that it looked great sitting on a shelf with his other audio equipment. This started with a wooden box which is some reused packaging. We’re not familiar with the ‘iNFUSiONES’ product; perhaps it’s tea or tobacco? At any rate, to this he added a custom face plate to host the character LCD, rotary encoder, two buttons, and to act as a grill for the two speakers.

The speakers and their accompanying amplifier circuitry were pulled from a portable speaker set. He combined them with a VS1002d MP3 decoder module, SD card breakout board, and the Arduino itself. In addition to the overview post linked above, there is also a collection of assembly photos, and a post discussing the way he arranged the code for the control systems (translated). See and hear the unit in action in the clip after the break.


Filed under: arduino hacks, digital audio hacks


  • Newsletter

    Sign up for the PlanetArduino Newsletter, which delivers the most popular articles via e-mail to your inbox every week. Just fill in the information below and submit.

  • PlanetArduino is powered by WordPress. Design by Jasone.it. Valid XHTML   •   Valid CSS
    47 queries. 0,788 seconds.